REAXT OMNI-1.0, User Manual

Page: 14 / 15

WIRELESS DUAL STEREO PAIRING - BLUETOOTH
14
Frequency Response ： 85-17kHz
Impedance ： 8 Ohm
RMS Rated Power ： 15W
SPL @ Rated Power ： 96dB
THD @ Rated Power ： <2.5%
Power Adaptor ： 110-240V @ 50/60Hz
Frequency Response ： 85-17kHz
Impedance ： 8 Ohm
RMS Rated Power ： 15W
SPL @ Rated Power ： 96dB
THD @ Rated Power ： <2.5%
Power Adaptor ： 110-240V @ 50/60Hz
Connect two Omni-1.0 speakers together for Wireless Dual Stereo.
•
When connecting together two Omni-1.0 speakers in Wireless Dual Stereo, they will first connect together for Left Channel – Right Channel.
To play in Dual Stereo, press and hold down the Play Control Button on both speakers for 3 seconds until the white light starts flashing on both speakers.
To prevent lip sync issues between the audio and video when connecting the Omni-1.0 speakers to a TV.
•The standard Bluetooth protocol has inherited latency and when used to play audio from a video, lip sync issues may occur between the audio and video.
If there is a sync issue between the audio and video, it is recommended to use a 3.5mm Audio Cable to connect the device playing the video to the Aux In on
the Omni-1.0 speakers.
•When using two Omni-1.0 speakers with a video device in Wireless Dual Stereo mode, a 3.5mm Audio Cable should be used to connect the device playing the
video to the Aux In on the Omni speaker. This speaker will be the 'Play Control Speaker'. The second speaker is paired and connected with the 'Play Control
Speaker'. The latency is reduced between the two connected Omni speakers because a proprietary wireless connection is used instead of standard Bluetooth.
STEREO SETUP