Reverse With Confidence
™
9
INST
ALL
ATION
GUIDE
Wiring
To power the system connect the power (RED) 12V+ wire to ignition
power and the ground (BLACK) wire to chassis ground.
• These are the only wires needed to power the entire system and all
the cameras. Each camera can be seen at any time by simply pressing
the power button and using the V1/2 button to toggle.
• The three positive trigger wires (WHITE-CH1, BROWNCH2, BLUE-
CH3) each represent one channel and will turn on their channel when
the trigger wire is energized with 12V.
• "Camera 3" is the designated backup channel. To have the the back-
up camera come on when you go into reverse, con-nect the BLUE wire
to reverse power (or any power source that comes on only in reverse).
• The other channels can similarly be triggered (i.e. side cam-eras can
be triggered by the turn signals etc.)
• To automatically have camera and monitor turn ON when vehi-cle
activates, simply twist BLUE positive trigger 12V+ to Red Power line
12V+ and wire to ig-nition power.
