background image

REAR VIEW SAFETY

22

Disclaimer

Rear View Safety and/or its affiliates does not guarantee or promise

that the user of our systems will  not be in/part of an accident or

otherwise not collide with an object and/or person. Our systems are

not a substitute for careful and cautious driving or for the consistent

adherence to all applicable traffic laws and motor vehicle safety

regulations. The Rear View Safety products are not a substitute for

rearview mirrors or for any other motor vehicle equipment mandated

by law. Our camera systems have a limited field of vision and do not

provide a comprehensive view of the rear or side area of the vehicle.

Always make sure to look around your vehicle and use your mirrors

to confirm rearward clearance and that your vehicle can maneuver

safely. Rear View Safety and/or its affiliates shall have no responsi-

bility or liability for damage and/or injury resulting from accidents

occurring with vehicles having some of Rear View Safety products

installed and Rear View Safety and/or its affiliates, the manufacturer,

distributor and seller shall not be liable for any injury, loss or

damage, incidental or consequential, arising out of the use or

intended use of the product. In no event shall Rear View Safety

and/or its affiliates have any liability for any losses (whether direct

or indirect, in contract, tort or otherwise) incurred in connection

with the systems, including but not limited to damaged property,

personal injury and/or loss of life. Neither shall Rear View Safety

and/or its affiliates have any responsibility for any decision, action

or inaction taken by any person in reliance on Rear View Safety

systems, or for any delays, inaccuracies  and/or errors in connection

with our systems functions.  

Summary of Contents for RVS-718F150

























Reviews: