Rear View Safety
Reverse With Confidence
™
12
13
MENU
Menu
GRID LINES
10
11
TOUCH BUTTONS OPERATION
full display screen:
short press to enter into “menu setting” interface
split screen: unusable
reversing:
long press to enter into “backup guide line” setting
left and right: unusable
Non-trigger state:
channel switch
Non-trigger state:
Trigger state:
Trigger state:
unusable
1
1
3
4
2
5
2
3
4
5
MENU SETTING
In “ full display screen” state, short press “ ” to enter into menu setting interface .“ ” and “ ” are to
change the figure of each setting.
About “WIRE CTR DELAY”
This function is used with wire control switch.
1. If "WIRE CTR DELAY" is setted "OFF", this function is same as the touch buton "CH" .
2.If "WIRE CTR DELAY'' is setted as other parameters, you switch one video screen to another one by wire control
switch, once the delay time is up, the screen will be automatically back to the pre-switching video screen.
“
”
BRIGHTNESS
50
{
{
{
short press to enter into “menu setting” interface
Non-trigger and reversing trigger state:Turn on/off screen
The others state: unusable
In menu setting state: Parameter down
In menu setting state: Parameter up
In full display mode, short press menu to toggle options and use the
arrow keys to change parameters.
Wire Ctr Delay
This setting controls function of the wire control switch
1) If setting is off, the wire control switch functions the same as the CH
button
2) If the setting is on the wire control switch changes the view, but the
view returns to previous state after delay time.
Generally, to help drivers estimate the distance from obstacles, there are
three lines for reference- red, yellow, and green. Those three lines are dis-
played on the monitor when car is reversing. The green line is 9.9 feet
from the back of the car and the yellow line is 6.6 feet away. The distant
red line is 3.3 from the backside of car while the closed red line is 1.3 feet
from the car. Both reference lines on the left and right should leave 0.65
feet from the car.
Grid Lines
9.9 feet
6.6 feet
3.3 feet
9.9 feet
6.6 feet
3.3 feet
1.3 feet
The accuracy of the grid lines can vary based on how you angle your cam-
era. Therefore to compensate for inaccurancies, you can adjust the grid
lines.
Adjustment
