10
Audio works on two ports of multiplexer and
positive triggers must be triggered for audio to
operate. #3 Port labeled “backup” (blue trigger)
#2 port labeled “DVD” (white Trigger)
When installing a TWo (2) camera setup, use ports
#3 and #2 and use positive triggers Blue and White
installation
There is a built in voltage regulator for our systems
which can handle 12-24 volts real consumption is
10 to 30 Volts
When installing all ThRee (3) cameras, use all
three ports and connect all positive triggers to
appropriate connections.
To automatically have camera and monitor
turn ON when vehicle activates, simply twist
BLUE positive trigger 12V+ to Red Power line
12V+ and wire to ignition power which can be
an accessory switch/fuse line and black wire
12V- to chasis ground.
Infra-red technology built into camera IR’s
are activated automatically according to the
lighting conditions
When using the postive trigger functions (blue,
yellow and white wires) each trigger function
needs to work on a seperate 12V+ source i.e.
the Yellow and White wires can be wired to a
turn signal circuit etc.
Grid lines function can be turned on/off by
pushing menu 8 times and than select ON/OFF
