RTL8812AE
Half Mini-Card User Manual
1
Rev.1.0
2.
Features
General
QFN76 9x9mm package
CMOS MAC, Baseband PHY and RF in a
single chip for IEEE 802.11a/b/g/n/ac Draft
2.0 compatible WLAN
802.11ac MIMO solution for 5G band
Complete 802.11n MIMO solution for
2.4GHz and 5Ghz band
2x2 MIMO technology for extended reception
robustness and exceptional throughput
Maximum PHY data rate up to 173.3 Mbps
using 20MHz bandwidth, 400Mbps using
40MHz bandwidth, and 866.7Mbps using
80MHz bandwidth.
Backward compatible with 802.11a/b/g
devices while operating at 802.11n data rates
Backward compatible with 802.11a/n devices
while operating at 802.11ac data rates.
Host Interface
Complies with PCI Express Base Specification
Revision 1.1
Standards Supported
IEEE 802.11a/b/g/n/ac Draft 2.0 compatible
WLAN
IEEE 802.11e QoS Enhancement (WMM)
IEEE 802.11i (WPA, WPA2). Open, shared
key, and pair-wise key authentication services
IEEE 802.11h TPC, Spectrum Measurement
IEEE 802.11k Radio Resource Measurement
WAPI (Wireless Authentication Privacy
Infrastructure) certified.
Cisco Compatible Extensions (CCX) for
WLAN devices
MAC Features
Frame aggregation for increased MAC
efficiency (A-MSDU, A-MPDU)
Low latency immediate High-Throughput
Block Acknowledgement (HT-BA)
Long NAV for media reservation with CF-End
for NAV release
PHY-level spoofing to enhance legacy
compatibility
MIMO power saving mechanism
Channel management and co-existence
Multiple
BSSID
feature
allows
the
RTL8812AE-CG to assume multiple MAC
identities when used as a wireless bridge
Transmit
Opportunity
(TXOP)
Short
Inter-Frame Space (SIFS) bursting for higher
multimedia bandwidth
WiFi Direct supports wireless peer to peer
applications.
Other Features
Supports Wake-On-WLAN via Magic Packet
and Wake-up frame
Transmit Beamforming
CCA on secondary through RTS/CTS
handshake.
Support TCP/UDP/IP checksum offload