background image

 RTL8192SE  

User’s Manual

 

                                                                                            10                                                                                       Rev.1.0

 

   

Transfer rate 

802.11b: 11 / 5.5 / 2 / 1Mbps 
802.11g: 54 / 48 / 36 / 24 / 18 / 12 / 9 / 6Mbps 
Draft 802.11n (20MHz, 800ns GI): 130 / 117 / 104 / 78 / 65 / 58.5 
/ 52 / 39 / 26 / 19.5 / 13 / 6.5Mbps 
Draft 802.11n (40MHz, 800ns GI): 270 / 243 / 216 / 162 /135 / 
121.5 / 108 / 81 / 54 / 40.5 / 27 / 13.5Mbps 
Draft 802.11n (20MHz, 400ns GI): 144.444 / 130 / 115.556 / 
86.667 / 72.2 / 65 / 57.8 / 57.778 / 43.333 / 43.3 / 28.9 / 28.889 / 
21.7 / 14.444 / 14.4 / 7.2Mbps 
Draft 802.11n (40MHz, 400ns GI): 300 / 270 / 240 / 180 / 150 / 
135 / 120 / 90 / 60 / 45 / 30 / 15Mbps 

FREQUENCY Range 

2400MHz ~ 2483.5MHz 

NUMBER OF CHANNEL 

11 for 802.11b, 802.11g, draft 802.11n (20MHz) 
7 for draft 802.11n (40MHz) 

 

4.5. Warning   

4.5.1 Federal Communication Commission Interference Statement 

This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against 
harmful interference in a residential installation.  This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications.  However, there is no guarantee that interference will not occur in a 
particular installation.  If this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one of the following measures: 
 

Reorient or relocate the receiving antenna. 

Increase the separation between the equipment and receiver. 

Connect the equipment into an outlet on a circuit different from that 

to which the receiver is connected. 

Consult the dealer or an experienced radio/TV technician for help. 

 
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation. 
 
FCC Caution: Any changes or modifications not expressly approved by the party responsible for 
compliance could void the user's authority to operate this equipment. 
 
IMPORTANT NOTE: 
FCC Radiation Exposure Statement: 
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. 
This equipment should be installed and operated with minimum distance 20cm between the radiator & your 

Summary of Contents for RTL8192SE














Reviews: