8
Assembly Instructions
2.)
Insert glass into the slots in
the table top as shown.
1.)
Place lava rock by hand. DO NOT dump bag out into tray to avoid clogging the burner with
dust. Position the lava rock across the burn pan to a level about 1” above the top of the burner.
Make sure that you do not block the igniter housing with lava rock to ensure proper ignition.
8
1
1
3
3
3
3
Igniter Housing
Lava Rock and Warning:
2.
Do not light or use this fire table if filler is wet. Ensure filler is completely dry before lighting.
Intense heat can cause wet filler to explode and hit someone causing injury.
3.
Please keep away from the fire table for at least 20 minutes during initial start up as filler
could retain some moisture from manufacturing and shipping.
1.
Do not overfill the burner area with rock. The depth of the filler should not be
more than one inch above the burner tube. Only Real Flame filler products have been
certified and tested by CSA for safe use with this Real Flame fire table. Using other filler
material may result in increased popping and cracking or increased CO gas emission.
