background image

18

Possible Cause: Burner ports are clogged or blocked.

 

-Clean burner ports. Do this by inserting a

 

paperclip into each of the burner ports to

 

ensure they are not clogged. WARNING: Make

 

sure burner is not on and the gas supply has

 

been properly disconnected. Allow 15 minutes

 

for unit to cool completely before touching it.

If  these  troubleshooting  steps  are  unable  to  resolve  the  problem, 

please call Real Flame at: 1-800-654-1704

Possible Cause 1: High or gusting winds.

 

-Increase fl ame to “HIGH” setting.

Possible Cause 2: Low on LP gas.

 

-Replace or refi ll LP gas tank.

Possible Cause 3: Excess fl ow valve tripped.

 

-Refer to “Problem: Sudden drop in gas fl ow”

Possible Cause 1: Ice has built up on the outside of the LP gas tank because the

    vaporization process is too low.

 

-Turn the control knob and the LP gas tank to “OFF”. Replace with a spare LP

 

gas tank and resume burning. Store the spare LP gas tank in a well ventilated

 

area, away from children.

Possible Cause 1: Out of gas.

 

- Refill or exchange your LP tank.

Possible Cause 2: Excess fl ow safety device may have been activated.

 

-

 if the flame goes out. In order for the unit to work flames must be contacting the 

 thermocouple located in the igniter housing. Visually inspect the thermocouple and 

 igniter housing to make sure there are no obstructions, such as lava rock or glass filler

 and that flames are contacting the thermocouple. 

 

 

Problem: Sudden drop in gas fl ow, or a reduced fl ame height

Problem: Irregular fl ame pattern, fl ame does not run the full length of the burner

Problem: Flame blow out

Problem: Flame seems to lose heat when burning in cold weather -

temperature below 50°F

Burner Ports

Troubleshooting

Summary of Contents for 42100140






































Reviews:

Related manuals for 42100140