4
Step 1: Choosing Installation Type
The Vivente can be configured in 4 different ways:
• Single-sided – Front glass only (see Fig 1a)
• Two-sided Right (see Fig 1b)
• Two-sided Left (see Fig 1c)
• Three-sided (see Fig 1d).
The Vivente is supplied as a Three-sided configuration.
Please follow the steps below to adjust to your desired arrangement.
1. Remove front bottom trim on unit. The bottom trim is secured by magnets. Push the trim
up and pull it out. See Fig. 2
2. On the desired side you wish to cover, remove side glass trim which is held in place by
four screws. Attach side panel in place of the side trim using the same four screws.
See Fig. 3a & 3b (The glass sides are not to removed when adding in the sides)
Installation Instructions
Fig. 1a
Fig. 1b
Fig. 1c
Fig. 1d
Summary of Contents for Vivente VVT100
