Real Flame Vivente VVT100, Installation & Operating Manual

Page: 17 / 25

17
SmartSense
SmartSense detects activity or movement in a room and automatically switches on the
flame effect, without the need for you to touch the controls. SmartSense will also detect
inactivity in a room and after a certain period of time switch the product into standby mode.
See Fig. 16 which illustrates the detection zone for SmartSense.
When the fire detects no activity, it will switch itself off. You can choose either these periods
of time - 30 minutes or 3 hours.
SmartSense is deactiviated for 3 minutes after the product is put into standby mode. This
allows you to leave the room after putting the product on standby, without triggering the
SmartSense function.
SmartSense has the following three settings:
"HOME" (via APP)
On this setting SmartSense will only switch the flame effect when it detects movement
between the hours of 5-11pm, so if you enter the room during the day the fire will not react.
However in the evening, your Real Flame fire will instantly switch on your flame effect –
remembering your last setting.
"
24 Hr" (Default)
SmartSense will switch on the flame effect when it detects movement at any time during
the day or night. This is ideal for retail and commercial environments.
"
OFF"
SmartSense can be switched off, which will allow the product to preform normally in every
other aspect
Controls
The unit can be controlled by:
• On board/Manual controls which are located on the upper right of the fireplace
(See Fig. 17)
• Remote control – supplied
• App control. Using a dedicated App on your smart device.
Not all of the features can be accessed by the on-board controls. To access the full range
of features, the downloadable App is required.
Pairing your remote control.
To pair your remote control simply turn OFF and ON the power to the product, now press
the standby button on your remote control and your handset is now paired with your
product.