15
HEATSEEKER INBUILT MODEL
Heatseeker Inbuilt Installation Procedure
(continued)
The Heatseeker Gas Firebox (Natural Gas Only) is approved for use with Pebbles.
To install the Pebbles, follow the installation instructions as per Figures 5-7. Note: A Real Flame
Pebble Tray needs to be ordered for this option.
Note: If a coals only configuration is being used, use the same set up as pebbles.
Figure (5) Install the metal angle at the rear of
the fireplace and place one row of
pebbles behind the burner rail.
Figure (6) Place pebbles between the first row
and the angled tray.
Figure (7) Place remaining pebbles up the
angle of the rear tray so as the tray
is hidden.
Note: Keep pebbles clear of burner rail.
Fit the trim to the front of the firebox.
Light the unit following the procedure on page 14.
Install the 225mm AGA approved gas cowl where using the chimney to vent the fumes.
Test the unit for safe operation and show customer correct operating procedures.
Test for spillage.
Perform pressure test.
TICK BOXES