29
Page
Slide flue onto connection spigot fully.
Tighten clamp fully.
Wipe excess silicon, visually check connection to ensure
connection is fully sealed.
Air Intake
Connection
Screw or rivet in 3
places to hold in
place.
Ensure flue is
supported and
clipped where
required.
Flue Discharge
Connection
Connect hot exhaust flue
and air intake flue as per
below.
Apply an 8mm silicon
bead fully around the
inside of the flue end
Fit flue clamp over flue
(loosely).
IMPORTANT-
Apply silicon bead between inner
connection of cowl and flue pipe to seal inner flue to
cowl. Outer does not require sealing.
Fit roof sealing method (Decktite or similar).
