SERVICING AND MAINTENANCE
(continued)
Figure (7) Loosen the top and bottom screws
on the inner glass frames. Do end glass if 3
sided model.
Figure (6) Now remove the stainless steel
corner section by removing two screws from
top and two from bottom.
Figure (8) Slide the inner glass out of the side
and also the end if 3 sided model supplied.
Figure (9) Set up ceramics as per page 12
and 13.
Figure (11) To remove the control module,
disconnect wires and lift from double sided
tape. Then remove module.
Figure (10) To remove the remote control
module, remove all wire connections and lift
from double sided tape. Then remove
module.
15
