Step Five
Figure 5
Repeat step four with the remaining three logs. Use figure 5 as reference for placing the logs.
After all logs have been fastened to the Lift Assembly slowly lower the lift arm. If the top four
logs do not rest on the Front Log (4) you may need to adjust the position of the Rear Log (5) to
the left or right.
Place assembled unit in your existing fireplace. Add decorative lava rock around the base of your
fireplace (optional).
Step Six
Figure 6
Using your Convert to Gel Log Set
With assembled unit in fireplace, raise lift assembly.
Place two cans of Real Flame gel fuel in the fuel
tray located in the middle of the grate. With an
extended lighter or long match light gel fuel.
Carefully lower lift handle.
During the initial burn you may experience a slight
odor. This odor is temporary and will be absent on
following burns.
Figure 6
Figure 5
1
2
3
4
5
