CHOOSING A LOCATION
The wall station is typically mounted directly to the wall with provided
screws, it can be wood or drywall applications.
a.
Strip off approximately 3/8” of insulation from the wire ends
b.
Unscrew the screws 1/8” by 3/8” (2) so that the wire ends can be
wrapped around the screws
c.
Wrap both stripped wire ends around the screws. It does not matter
which wire is wrapped around which screw (polarity proof connection).
d.
Tighten both screws and check if the wire ends are held firmly.
W A L L S T A T I O N I N S T A L L A T I O N
15 CONTR
OL
UNIT
HOUSING
21
A
TT
A
CHING CEILING BRA
CKET
Summary of Contents for Fremont Opener
