EN
6
2.
Connect the garden hose with a
standard quick coupling
1. Attach the high pressure hose to the
trigger gun and machine.
Detach the high pressure hose by
pressing the pawl (A) or button (B)
1.
Push the lance into the trigger gun
2.
When inserted turn it.
Caution:
Make sure the lance is
properly fixed to the gun
3.
Attach the nozzles.
Caution:
When attaching the nozzle
the button (A) on the nozzle should
come out again. Check before
activating the trigger that the nozzle is
properly fixed.
An ordinary 1/2" garden hose of min.
10 m and max. 25 m will be suitable.
IMPORTANT!
Only use water without
any impurities. If there is a risk of sand
particles in the inlet water (i.e. from
your own well), an additional filter
should be mounted.
1.
Let the water run through the
water hose before connecting it to
the machine to prevent sand and
dirt from penetrating the machine.
Note: Check that the filter is fitted
in the water inlet pipe and that it is
not clogged up.
2.
Connect the water hose to the
water supply by means of the quick
connector
(inlet
water,
max.
pressure: 10 bar, max. temperature:
40°C).
3.
Turn on the water.
The trigger gun (2) and lance is
affected by a thrust during operation -
therefore always hold it firmly with
both hands.
3.5 Start/stop of the machine
3.4 Water connection
2
A
1
3
3.3 Mounting of lance and nozzle
A
B
3.2 Mounting of high pressure hose
A
1