7
8. Attach garden hose to water supply (Fig. 8).
WARNING!
The intake water temperature
must not exceed 104ºF/40ºC.
CAUTION!
The washer must only be used
with clean water; use of unfiltered water
containing corrosive chemicals will damage
the washer.
Let the water run through the water hose before
connecting it to the machine to prevent sand
and dirt from penetrating the machine.
NOTE:
Check that the filter is fitted in the
garden hose adaptor and that it is not clogged
up.
9.
Make sure the motor switch is pushed to the
OFF position before plugging the unit into the
power outlet(Fig.9).
10.
Check that the electrical supply voltage and
frequency(Volt/Hz) correspond to those
specified on the pressurewasher rating plate. If
the power supply is correct, youmay now plug
the pressure washer into the power outlet (Fig.
10).
NOTE:
The GFCI may need to be reset when
first plugged into the electric outlet. Press the
"Reset" button until thepower light indicator
on the GFCI illuminates.
Fig.7
Garden hose
Water inlet
Garden hose
Connect to water supply
Fig.8
Fig.9
Reset
Power light indicator
GFCI
Fig.10
