PA 64 Start Up and Initial Testing
1.
Connect your microphone to the “Mic 1” on the front of the PA 64 and / or
“Mic 2” on the back.
2.
Turn on the vehicle, then the PA 64 power switch (the power light will
come on), turn on the microphone and talk in to the mic. Adjust the mic
volume to your desired level with the “Volume” control on the front of the
PA 64.
3.
Turn off the mic and turn on the stereo, adjust the stereo volume as
normal to desired level.
4.
Turn the “Audio Mute” control on the front of the PA 64 to half way /
50%. (nothing will happen yet)
5.
Turn the mic back on and the radio volume will mute to 50% of what you
just set. Turn the mic off and the radio will come back up to full volume
automatically.
6.
You can adjust the amount of muting by turning the “Audio Mute” control
on the front of the PA 64. Full left = no muting, full right = 100% muting.
7.
When playing music from your MP3 player through the front “AUX 1 or
rear AUX 2 input”, the muting will function the same as listed above in
point #5.
Note:
Both mic inputs are tied together internally. When using two mics, if
either mic is turned on, it will trigger the audio muting.
Note:
The front controls on the PA 64 will not function with the mic switch in
the OFF position. This is normal.
Note:
When connecting your MP3 player into the “AUX 1” or “AUX 2” inputs
the sound will blend together with the stereo. It’s recommended to turn off the
stereo when using the “AUX input” so they don’t compete.
