PA 64 Multi Pin Plug Wiring Code
12V + Battery
Yellow
12V + Switched
Red
12V – Ground
Black
Right Front +
Gray
Right Front -
Gray / Black
Left Front +
White
Left Front -
White / Black
Right Rear +
Purple
Right Rear -
Purple / Black
Left Rear +
Green
Left Rear -
Green / Black
Additional Wiring Info
Yellow 12V + Constant power - 10 Amp fuse in the multi wire socket base
Red 12V + Accessory power - Internal automatic re-settable fuse
Acc. Fuse Reset Instructions
To reset the onboard Accessory Fuse, unplug
the main power plug or turn off the vehicles power for 10 seconds.
Note:
Never increase the value of the fuse as damage may occur.
Note:
The 4 x 50 Watt amplifier inside the PA 64 is designed to accommodate a
4 – 8 Ohm floating speaker load.
Note:
DO NOT EXCEED a 4 – 8 Ohm speaker load! If speaker load is outside
intended range, the PA 64 will blow the 10A power fuse after a short time.
Note:
The PA 64 amplifier uses a floating output. Please ensure your speakers
are not common grounded or connected to the vehicle ground as damage will
occur to the PA 64 and repairs / replacement will not be covered by warranty.
Note:
All “Speaker Connection Options” are drawn using 4 Ohm speakers and
these diagrams will offer a load range from 4 – 8 Ohm to the PA 64 amplifier.
When in doubt… please call 1 888 724-5351
