BASIC OPERATION
1.Switching the unit ON
Hold the STANDBY button on the panel/remote control down for a few
seconds and the unit will turn on, illuminating the LED light. If the unit
has been in STANDBY mode for a long time, it will turn off automatically.
To switch the unit on again, just press the STANDBY button on the panel/
remote control.
2.Input mode selection
You can select the input mode by pressing the INPUT button on the
remote control or the POWER/INPUT button on the front panel.
3.Mute
To mute the unit, press the MUTE button once on the remote control. To
cancel the MUTE option, press the MUTE button again.
4. Volume adjustment on the remote control
Press the VOL +/- button on the remote control to adjust the volume.
5. Volume adjustment on the unit
Turn the dial anticlockwise to decrease the volume and clockwise to
increase the volume.
6. FUNCTION dial
Twist the dial left or right to adjust the different effect for all options
(light, colours or volume) under the MENU button.
7. MENU selection
Press the MENU button on the front panel or remote control to choose
between 7 options:
1. tb- Treble
2. 1U- Mic volume
3. 2U - Guitar volume
4. dl -Delay
5. EC- Echo
6. bO - Light modes
7. BA- Bass
Select one option and then twist the FUNCTION dial on the front panel or
press -/+ on remote control to adjust each option effect.
8.Repeat
During playing status, press the repeat button on the remote control once
to repeat playing the current track. To cancel the repeat option press the
repeat button again.
9.Previous/next track
By pressing /
you can select a specific song from the play list.
10. USB Charge
USB 5V 1A power output for mobile phones.
Bluetooth Pairing
•
To gain full control over the device via your phone, tablet etc. please
download the app “Discolor DJ”.
•
Press the INPUT button on the panel/remote control to select Bluetooth
mode.
•
Simultaneously open the Bluetooth setting on your phone, tablet or any
other Bluetooth enabled audio device and select “Discolor DJ”. The unit
and device will then connect via Bluetooth.
•
Once the unit and device are connected via Bluetooth, open the “Disco-
lor DJ” app on your phone, tablet etc. and press the Bluetooth button.
This will allow you to fully control all features.
