Reach Bliss RT15, User Manual

Page: 7 / 18

To ensure the phone works, be sure to use the specified charger.
During charging, do not directly remove the battery.
When charging, be sure to put an ambient temperature of 0
~ 45 ventilated
place.
Secure Password
PIN code : This is your SIM card's personal identification number, PIN code is
usually supplied with the SIM card provided by your network operator.
PIN2 code : PIN2 code supplied with some SIM card is also provided by the
network operator.
If you enter the wrong PIN code (SIM card will be locked), and PIN2 code, need to
enter the corresponding PUK and PUK2 code to unblock it, please contact your
network operator.
PUK code : change a blocked PIN code requires that private PUK code to unlock
the password. PUK code is provided with the SIM card. Otherwise, please contact
your network operator for the password. If you lose this password, please also
contact your network operator.
1. Common Functions
1.1 Power On / Off
1. Long press the switch button on or off your phone.
2. This machine supports two GSM network SIM card. When the phone is
inserted into the two SIM cards, and is turned SIM card PIN code, then enter the
correct boot need a SIM card PIN and to determine only open the phone.
3. mobile phone is turned on, it will automatically search the network, if the network
search to the authorization on the screen will show the network name and signal
strength (network name and signal strength as the startup type and signal strength
SIM card dependent); if the search does not to authorize the network, the phone can
only use some non-emergency calls or other communications functions.
1.2 Call
Standby interface, click on the bottom left of the interface dial icon to enter the
virtual keyboard dialing interface, just click the number buttons to enter the phone
number you want to call, click the Delete button to delete a wrong number, long click
the Delete button you can delete all entered digits, Click Dial key to make the call.