Operating Manual
Page 95 / 116
Copyright © REA Elektronik
REA ScanCheck 3n
V 1.2.0 24/02/2020
REA
VERIFIER
5.6.1.3.7 <3> Settings
– Sub-menu <7> factory reset
If this function is confirmed with the
<7>
button or with arrow key
selection and the
<OK Enter
> button, all previously implemented
individual settings from menu 3 device settings are reset to the
factory settings, with the exception of any passwords
that may have
been entered.
With this, individual device settings including the most recent
adjustment data will be lost.
This process cannot be reversed.
Restoring the factory settings only takes place after further
confirmation. The process requires a few seconds and is completed
with a confirmation.
5.6.1.3.8 <3> Settings
– Sub-menu <8> USB update
For a detailed description of this function, please refer to chapter 3.7 Updating the operating
software in the REA ScanCheck 3n
Fehler! Verweisquelle konnte nicht gefunden werden.
.
5.6.1.3.9 <3> Settings
– Sub-menu <9> Languages
For a detailed description of this function, please refer to chapter 3.4.2 Changing the menu
language selection
Fehler! Verweisquelle konnte nicht gefunden werden.
.
5.6.1.4 Set-up sub-menu <4> Edit document
By entering a user comment it is possible to individually supplement
the current measurement log with specific remarks. By entering the
desired character string in the user comment field it is possible to
supplement the message with a corresponding comment.
Pressing the input keys multiple times enables the user to select
between the different letters and special characters that are stored
on the respective key. Using the <del.> button, it is possible to
delete and overwrite any incorrect character entries.
By pressing the < Store> button it is possible to accept the entries.
5.6.1.5 Set-up sub-menu <5> Article selection (option only)
Only if the article lookup option is enabled and the article database has been switched on via:
TransWin32
– Configure – Evaluation – Database (ADB) – Use article database: ON
the article selection can be switched on.
(refer in this regard to the separate manual “REA article lookup 32”)
