background image

 

Operating Manual

 

Page 114 / 116

 

 Copyright © REA Elektronik 

REA ScanCheck 3n

 

 

V 1.2.0   24/02/2020 

 

REA

 

VERIFIER

 

12 Software update 

The latest released version is available as a free download on the Internet on our support Web 
pages at the following address:  

https://support.rea-verifier.de

 

 

You can access the support area of the Rea Verifier Web site by entering the following access 
data:  
 

User name:

 

REA_Verifier

 

Password:

 

REA-C36754

 

 

 

13 Protected trademarks 

All product names or trademarks mentioned in this document known to REA as protected are 
marked as such. 
 
Microsoft®, Embedded Visual Tools® are registered trademarks of the Microsoft Corporation in the 
United States and other countries; Intel® and ARM are trademarks of the Intel Corporation.  
Linux is a registered trademark of Linus Torvalds.  
 
REA is not responsible for the validity of this information.  
 
The mentioning of any protected terms and names is not an infringement of third-party rights. The 
mentioning has the sole purpose of explaining the operation of the REA product since REA 
products require for operation Windows or Linux as their operating system. 
From this use, REA Elektronik does not infer claims to third-party trademarks and brand names.  
 
 

14 Licence conditions 

 

END USER LICENSE AGREEMENT for the use of this application program, hereinafter 
referred to as “software”, from the company REA Elektronik GmbH, Teichwiesenstrasse 1 in 
D-

64367 Mühltal, Germany, hereinafter referred to as “REA”. 

Please read this License Agreement carefully before installing the software. This End User 
License Agreement is a legal agreement between you (either as a natural person or legal 
entity) and REA concerning the software described above and the associated documentation 
in digital format or as a hard copy. The software also includes all updates and extensions to 
the original software supplied by REA. By installing, copying, downloading or using or 
accessing the software in any other way, you declare yourself as being legally bound to the 
terms of the License Agreement and compliance therewith. If you do not agree to the terms of 
this License Agreement, you are not authorized to install or use the software. 
It should be noted that it is not possible with the current status of technology to create 
computer software that operates in a flawless fashion in all applications and combinations. 
As such, the contractual object is merely the utilizible software as defined by the description 
and instructions for use. It is licensed to the exclusion of all warranties. The software is the 
copyright-protected property of REA. 

 

 

Summary of Contents for ScanCheck 3n





















































































































Reviews: