re3D gigabot, Quick Start Manual, Page: 13 / 34

quick start guide
13
b1
b2
Using the Viki LCD
controller, move the bed
down 150mm. Press
the button to see the
main menu, then select
“Prepare,” scroll down to
“Move Axis,” then “Move
1mm,” then “Move Z,”
and finally turn the wheel
clockwise until it reaches
150mm.
Using the 8mm
combination wrench,
loosen each of the 2
M5x12 hex head screws
that fasten the bed side
plate to the bed cross
rails. There are 8 in total.