30
POWER SUPPLY CONNECTIONS
Before proceeding with the connection, make sure that the wires (Live and Neutral) are inside the
area specifically obtained in the wall.
Take the internal wall-mounting part (4i) and the tools
necessary to connect the main supply to the stripped wires
supplied in the proper compartment.
Connect properly and safely the Live wires to the terminal
block identified as “N” and “L”.
Switching ON and OFF can be run by remote. To control the
product with recessed switch, it’s necessary, during
operation, that switches are always set on 1, as shown in
the picture (Y). To turn on the product through wall switch,
connect a bipolar switch in sequence to “L” and “N”, as
shown in the picture (a)
Product can be connected to the network home
automation by serializing the main supply to set switching
ON and OFF.
Connections must be done as shown below: