UM / UM PLUS
Chillers and inverter air / water heat pumps with axial fans
5
The manual of UM / UM Plus units contains all the necessary information for the better use of the equipment under safety
conditions for the operator thus meeting the requirements listed in the 2006/42/CE Equipment Directive and following
amendments.
1
AIM AND CONTENTS OF THE MANUAL
This manual provides basic information as for the installation, the operation and the maintenance of the UM / UM Plus units. It is
addressed to machine operators and it enables them to use the equipment efficiently, even if they do not have any previous
specific knowledge of it.
This manual describes the characteristics of the equipment at the time in which it is being put on the market; therefore, it may not
include technological improvements introduced later by the company as part of its constant endeavour to enhance the
performance, ergonomics, safety and functionality of its products.
The company, therefore, is not constrained to update the manuals for previous versions of machines.
It’s recommended that, the user must follow the instructions contained in this booklet, especially those concerning the safety and
routine maintenance.
1.1
HOW TO KEEP THIS MANUAL
The manual has to be always kept with the unit it refers to. It has to be stored in a safe place, away from the dust and moisture. It
has to be accessible to all users who shall consult it any time they are in doubt on how to operate the equipment.
The company reserves the right to modify its products and related manuals without necessarily updating previous versions of the
reference material. It declines also any responsibility for possible inaccuracies in the manual if due to printing or transcription
errors.
The customer shall store any updated copy of the manual or parts of it delivered by the manufacturer as an attachment to this
manual.
The company is available to give any detailed information about this manual and to give information regarding the use and the
maintenance of its own units.
1.2
GRAPHIC SYMBOLS
Indicates operations that can be dangerous for people and/or disrupts the correct operation of the equipment.
Indicates prohibited operations.
Indicates important information that the operator has to follow in order to guarantee the correct operation of the
equipment in complete safety.
2
SAFETY LAWS
The UM / UM Plus units have been designed in compliance with the following Directives and Harmonised Norms:
•
97/23/CE, 2014/35/UE, 2014/30/UE, 2011/65/UE, 2012/19/UE Community Directives
•
UNI EN 378-1, 378-2, UNI EN 12735-1 Norms
•
CEI EN 60335-2-40 Norms
•
CEI EN 55014-1, CEI EN 55014-2, CEI EN 61000-3-2, CEI EN 61000-3-3, CEI EN 62233 Norms
3
PERMITTED USES
•
The company excludes any contractual and extra contractual liabilities for damages caused to persons, animals or objects, by
incorrect installation, setting and maintenance, improper use of the equipment, and the partial or superficial reading of the
information contained in this manual.
•
These units have been designed only for heating and/or cooling water. Any other use not expressly authorized by the
manufacturer is considered improper and therefore not allowed.
•
The location of the plant, the hydraulic and electrical circuits must be established by the planting designer and must take into
account both technical requirements as well as any applicable local laws and authorized specifications.
•
The execution of all works must be performed by skilled and qualified personnel, competent in the existing rules in different
countries.
