RDZ EASY CLIMA, User Manual

Page: 9 / 20

9
MAIN VALUES SHOWN ON THE DISPLAY
In this chapter, select the data that will be displayed in the main screenshot and vary between the options described in the table
below.
Access the menu with a long press of the key, and then:
• by pressing the / keys, scroll the main values displayed
• by pressing the key, exit the menu
• by pressing the key, the value is transferred into the main screenshot and the menu is exited
First level Description
1
amb
The LT area room temperature value will start to flash after a few seconds.
If the room probe is configured but not connected or in short circuit conditions, flashing will be shown
Outr
on the DISPLAY.
If the room probe IS NOT configured, this screenshot will not be displayed
2
est
The
external temperature
value will start to flash after a few seconds.
If the external probe is configured but not connected or in short circuit conditions, flashing will be shown
Outr
on the DISPLAY.
If the external probe IS NOT configured, this screenshot will not be displayed.
3
umid
The
LT area room humidity
value will start to flash after a few seconds.
If the room probe is configured but not connected or in short circuit conditions, flashing will be shown
Outr
on the DISPLAY.
If the humidity sensor IS NOT configured, this screenshot will not be displayed
4
mand
The flow temperature value will start to flash after a few seconds.
If the flow probe is configured but not connected or in short circuit conditions, flashing will be shown
err
on the DISPLAY.
5
setm
After a few seconds the Set-Point calculated for the Area mixed system flow will start to flash.
6
pos
After a few seconds the current value of the
position from 0% to 100% of the area 1 mixing valve
starts
to flash.
7
ora
After a few seconds the time in progress is displayed in hours and minutes (e.g. 12:00) in a permanent way,
with the flashing.
8
Gior
After a few seconds the value of the
day of the month
in progress will be displayed (from 1 to 31)
9
mese
After a few seconds the value of the month in progress will be displayed.
10
anno
After a few seconds the value of the year in progress will be displayed.
The last two characters indicating the year are displayed (e.g. for 2011 will be displayed
11
).
.....
19.9 °C
20.0 °C
20.1 °C
.....
.....
16.9 °C
17.0 °C
17.1 °C
.....
.....
24.9 °C
25.0 °C
25.1 °C
.....
.....
27.9 °C
28.0 °C
28.1 °C
.....
.....
54.9 °C
55.0 °C
55.1 °C
.....
250
HOME
SET-POINT MODIFICATION PROCEDURE