5. Amplifier's control settings by the computer
All settings introduced by the amplifier's control panel can be also done by the PC computer. To get the
possibility of the amplifier control by the computer, the program MWL Easy Manager must be installed (
it is on the CD added). MWL Easy Manager program is created only for the configurations of AMWL-
DSP4A series. Licensor is not responsible for any harm of the program operation or for the wrong use of
the program.
MWL Easy Manager installation instruction
I. Program MWL Easy Manager requires the installation of Microsoft. NET Framework 3.5 Service Pack 1
for Windows NT, XP, 98 system ( for Windows Vista and windows 7 systems - there is not necessary).
Installation file is on CD added. Dotnetfx35.exe platform can be downloaded from the Microsoft
II. In the catalogue VCM Driver you can find drivers for use the USB port from the amplifier AMWL-DSP4A
(CDM2.04.16.exe)- also need to be installed
III. After dotnet35fx.exe installation MWL Easy program can be installed
Installation file is in Rduch MWLEasyMgr 2.0 Install/Setup.exe
IV. After the program installation, it should work automatically.
V. After switching the amplifier on , program automatically detects port, where the device is installed.
Switching the amplifier on, is not necessary- parameters can be set in the program and than can be recorded in the
File first and aflter that the amplifier can be switched on and the data can be copied. To join the amplifier with the
computer, in the menu “ Comunication”, the order “join” should be chosen.
7
This window appears and after choosing the device, the order “Join” should be clicked on once again .
