ICP 300 IN-CAB PRINTER
5
Operation
When installed with a Wizard instrument the printer is normally powered on
as the vehicle is started.
When installed with a Pro-Series/Psi instrument the printer is powered on
when the instrument is switched on.
The status LED illuminates and the printer mechanism is reset.
Pressing the button advances the paper.
Power-On Self-Test
Press and hold the button and then power up the instrument. The
printer will then print a self-test report.
The self-test procedure checks most of the printer functions except for the
serial interface
Status LED
If there is a problem with the printer, the status LED will indicate a fault
condition by a flashing sequence as follows.
LED Indication
Condition
Solution
On
Normal
-
Off
No Power
-
* * *
Paper Out
Fit new paper
** ** **
Print head too hot
Allow head to cool
*** *** ***
Power below 10V dc
Check V
