ICP 300 IN-CAB PRINTER
4
Setup
Plug the printer cable RJ-12 connector into the back of the printer and then
attach the mounting plate with the two M3 screws provided.
The cable is connected normally to the upper port on a ‘Pro-Series’/’Psi’
head unit, or into the ‘Terminator’ junction box of a ‘Wizard’ instrument (fig.
2).
Figure 2 Connecting to a Wizard Head Unit
Connect the lead Pt No. S/CB/167-4-005 onto the 4-way connector in the
terminal box as shown.
Locate the cable grommet onto the moulding, and cable-tie the head unit
lead onto the moulded cable saddle to provide strain relief.
RED WIRE
