Using the Performance Series Intercom Performance Series
________________________________________________________________________
6 RDM Industrial Electronics Inc. 2019
Calling From Station
Selector to Call Station
4.
Press the HOLD key again.
The display shows HOLD = 01 and LIS. The second call
is still on hold and the Station Selector is connected to
the first caller.
5.
Press and release the TALK key to converse with the
first caller.
6.
Press the STD BY key when finished.
The display shows HOLD = 01 and SBY and the Station
Selector beeps.
7.
Press HOLD.
The display shows the second station number and LIS.
8.
Press and release the TALK key to converse with the
second caller.
9.
Press the STD BY key when finished.
There are three ways to call from the Station Selector to a
Call Station:
•
Select a specific Call Station.
•
Use directory assistance.
•
Use All Call Mode.
See All Call Mode
.
Select A Specific Call Station
System must be in the Standby mode. To select a specific Call
Station:
1.
Press the key(s) associated with the Call Station
being called for the desired Call Station number (Call
Stations 1 through 9 are entered as one digit).
Display shows the Call Station number and name.
2.
Proceed as described under Steps 2 through 4 under
the previous section
One Call Station Calling Station
Selector.
Use Directory Assistance
Directory assistance allows searching for a Call Station by
name. The system must be in the Standby mode. To use
directory assistance:
1.
From the Standby mode, press the MENU/0 key.
The display shows S = 01 and the station 1 name.
2.
Do one of the following:
•
Use the Left/Right Arrow keys to find the desired
Call Station
•
Select a specific Call Station as a starting number:
:HOLD=01:LIS
S=12: PUMP # 12
:HOLD=01:SBY
_:Press HOLD
: :LIS
S=08: PUMP # 08
