Using the Performance Series Intercom Performance Series
________________________________________________________________________
8 RDM Industrial Electronics Inc. 2019
Paging to another
Station Selector
Responding to a Page
from another Station
Selector
There are two ways to page from one Station Selector to
another Station Selector:
•
Enter a specific Station Selector number.
•
Use directory assistance.
To page by entering a Station Selector number:
1.
Press the keys associated with the Station Selector
being paged (Station Selectors are designated 71
through 85).
2.
Press TALK
Display shows the Station Selector number being paged. If no
response from the paged Station Selector in 30 seconds,
system returns to Standby.
To page by using the directory assistance:
Directory assistance allows searching for a Station Selector or
Call Station by name. The system must be in the Standby
mode. To use directory assistance:
1.
From the Standby mode, press the MENU/0 key.
The display shows S = 01 and the station 1 name.
2.
Press the left arrow key until the desired Station
Selector number appears in the display
(Station Selectors 1 through 15 are designated
71 through 85).
3.
Press TALK
Display shows the Station Selector number being paged. If no
response from the paged Station Selector in 30 seconds,
system returns to Standby.
To respond to a page request:
1.
Press TALK to accept page request
Display shows the Station Selector number
paging. Speaker produces a distinctive alert
tone.
or
Press STD BY to ignore page request.
Display shows STD BY to ignore page request
2.
Proceed as described under Steps 2 through 4
under the previous section
One Call Station Calling
Station Selector.
: :SBY
S=72:SELECTOR 02
: :
:..PAGING...
: :SBY
S=72:SELECTOR 02
: :
:..PAGING...
PAGE:REQUEST:SBY
S=71:SELECTOR 01
PAGE:REQUEST:SBY
:..PAGING...
