manualshive.com logo in svg

RD Instruments Cobra-Tac, User Manual, Page: 40 / 62

Share
Download
RD Instruments Cobra-Tac User Manual Download Page 40

Cobra-Tac User's Guide 

page 34 

RD Instruments 

The diver must use the 

SET UP 

function on the 

NAVIGATION

 menu to 

establish the starting point and then select the 

SURVEY

 

NAV

 option (see 

“Navigation Menu,” page 27

).  Once the diver enters the water, use the 

START

 function to begin the survey. 

The diver then completes the survey while marking events using the 

MARK

 

function of the system.  When the diver is ready to return to the starting 
point, use the 

HOME

 function. 

H O M E

S TA R T

M A R K

C A N C E L

3 3 8 

°

D

A

4 0     0

.

4 8     0

.

R E C O R D I N G

M I S S I O N

 

Figure 19. 

Free Navigation Screen 

 

CAUTION.  

To end a mission, back out (

CANCEL

) until at the main screen, 

then turn the power off.  

This ensures that the events are saved.

  If the 

Cobra-Tac power is turned off before returning to the main screen, the 
marked events will not be saved. 

 

 

CAUTION.  

To switch modes (for example, from Waypoint Nav to Grid 

Nav) once a navigation option has been started (i.e. the 

START

 button was 

pushed), you must use the 

CANCEL

 button to back out until at the main 

screen and than turn the power off.  Turn power on and select the desired 
navigation mode.  

If the power is not cycled, the mode will not change.

 

 

Summary of Contents for Cobra-Tac































































Reviews:

No comments