RD Instruments Cobra-Tac User Manual Download Page 34

Page: 34 / 62

Cobra-Tac User's Guide

page 28

RD Instruments

•

WAYPOINT NAV

– The

WAYPOINT NAV

option allows a diver to

select a mission profile that has been created using the software

CobraWare

or through the

UTILITIES

menu and then navigate

via waypoints.

•

GRID NAV

– The

GRID NAV

option is used for hydrographic

beach surveys.

•

MARK NAV

– The

MARK NAV

option is used to navigate back to

a previously marked location.

•

SURVEY NAV

– The

SURVEY

NAV

option allows a diver to sur-

vey a given area and record any event.

CAUTION.

To switch modes (for example, from Waypoint Nav to Grid

Nav) once a navigation option has been started (i.e. the

START

button was

pushed), you must use the

CANCEL

button to back out until at the main

screen and than turn the power off. Turn power on and select the desired
navigation mode.

If the power is not cycled, the mode will not change.

5.6.1

Set Up Option

The

SET UP

option is used to input the geodetic (Longitude/Latitude) start-

ing position, magnetic variation, and activates the record function to save
positional and hydrographic data in the navigation computer.

MAG VAR :

X X X

SCROLL

SELECT

RECORD Y/ N

LA T: XX° XX . XXXX X
LONG: XXX° XX. XXXX X

A CCEPT

CA NCEL

Figure 12.

Set Up Option

Using the

SCROLL

function, the user/diver highlights the field where data

needs to be entered. The

SELECT

function allows the user/diver to choose

the data for the field selected (0-9 or N-S). Repeat this process from field
to field until all information is entered. The user/diver then uses the

ACCEPT

function to load the data into the system. Selecting

ACCEPT

returns

the display back to the

NAVIGATION

menu.

NOTE.

The

SET UP

option must be completed before any navigation

function can be started.

Summary of Contents for Cobra-Tac































































Search results

Summary of Contents for Cobra-Tac

Reviews:

RD Instruments Cobra-Tac, User Manual, Page: 34 / 62

Search results

Summary of Contents for Cobra-Tac

Reviews: