Product Guide | Issue 1.5 | GP Gateway
Page 5
Setting up the Gateway
The GP Gateway
2
Setting up the Gateway
2.1
User Instructions
The GP Gateway has a default IP address of 192.168.0.101. The user can ensure that this address is loaded by
pressing the setup button on the side of the GP Gateway on power up for 5 seconds.
Please follow the procedure listed below to be presented with the GP Gateway configuration page. (fig. 1)
1. Connect a CAT5 patch lead into the Ethernet port of the GP Gateway.
2. Connect the CAT5 patch lead into the Ethernet port of the laptop / PC which will be used to configure
the GP Gateway.
3. Ensure that the laptop / PC is assigned a static IP address within the range of 192.168.0.
xxx
.
NOTE - care should be taken to ensure that this IP address doesn’t clash with any existing devices
resident on the network.
4. Power the GP Gateway off and on whilst holding the setup button in.
5. A standard web browser session can now be started on the laptop / PC. Type the default IP address of
192.168.0.101 into the browser address bar to display the GP Gateway setup screen (fig. 1)
2.2
Fig 1 - Screen Shot of the Configuration Page
