DCN: 140-01773-03
Page 15
User Settings
Select
Set Clock
Filter Service
Maint Service
Screen Timeout 0
Done
Heat and Cool
Preset: Comfort
Preset: Energy Miser
Select Schedule
Select
Done
as per that days schedule stored in the thermostat. “Hold” mode stops schedule operation
and holds the current setpoints until changed manually or by network commands.
The Schedules Screen gives you the option of setting a custom setback schedule or to
load one of two preset schedules.
Menu Options
Heat and Cool:
You can change the individual day/hour
and setpoints for the Heating and Cooling schedule by selecting
this menu item.
Preset: Comfort:
This is a preset schedule with mild setbacks.
Select this menu item to load the Comfort schedule into the
thermostat. Confirmation screen will be displayed for Yes/No entry.
Preset: EnergyMiser:
This is a preset schedule with deeper setbacks.
Select this menu item to load the EnergyMiser schedule into the thermostat.
Confirmation screen will be displayed for Yes/No entry.
Day Schedule Screen
When you select the Heat and Cool Schedule menu item,
the “day” schedule programming screen opens and the
schedule for current day will be displayed. Use the scroll buttons
to highlight the data to be modified. Once the data has been
highlighted, use the +/- buttons to change the value of the data.
To copy a days schedule to another day or group of days, move the
cursor to “
C
” on the
bottom right of the schedule screen. When you highlight the “
c
”, the button below will
become “Copy”. Press this button to change to the Copy Schedule Screen.
Copy Schedule Screen
The Copy Schedule screen is a sub screen of the Schedule screen.
The Copy Schedule screen allows you to copy a day’s schedule
to another day or group of days.
First select the day to be copied in the Schedule screen.
Scroll to the “
c
” at the bottom of the Schedule screen to highlight it.
The “Next” button will change to the “Copy” button.
Press the “Copy” button to open the Copy Schedule screen.
Scroll through the days and select the days you want to copy the schedule to by setting the
“
N
” under each day to “
Y
” by using the Yes/No buttons.
Afte
r selecting all the days desired, press the “COPY” button.
Exit the Copy Schedule screen with the “DONE” button.
User Settings Menu Items
Set Clock > go to the clock setting screen
Filter Service > go to the filter timer setup screen
Maint Service > go to the maintenance timer setup screen
Screen Timeout > sets the time in seconds to switch to the
minimized screen
F/C Settings > go to the F/C mode selection screen
Sensor Calibration > go to the sensor calibration screen
Backlight/Display > go to the backlight and display setup screen
BACK
COPY
Copy Monday Schedule
To
Tue Wed Thu Fri Sat Sun
N N N N N N
Yes
No
DONE
NEXT
Monday Schedule
Time Heat Cool
Wake 06:00 A 70 79
Day 08:00 A 62 85
Eve 04:00 P 70 78
Sleep 10:00 P 62 82 C
+
-