www.modellmarkt24.ch
To get started easily. First paste the horn rudder. Same as for the wing,
don't hesitate to dig the spar and glue the clevis on the carbon rod.
The installation of the fuselage has no particular problem. Take the time
to reflect on the servos used and their location. same for the battery.
The servoplate will paste it epoxy 24 hours with silica. Predict the
location of the ballast tube and it locks. In the photo, he was chosen to
stick a M4 nut in the tube. A screw will block the ballasts.
www.modellmarkt24.ch
