
①
Local record
②
Screenshots
③
Resolution
④
Speaker
⑤
Upside down
⑥
Screen lock
⑦
Setting
※
If you want to connect your IP camera to a different Wi-Fi than the Wi-Fi you have entered,
please delete the device from the application and reset and setting the camera.
If you want to return the setting value, etc. to the factory condition, you
can reset it in the machine maintenance part.
How to reset IP camera
(Unlock the upper surface maintenance part)
▶
You can reset the IP camera after lifting the top cover to remove it.
▶
When you look at the maintenance part from the top, the part shown
in the upper left, figure is the IP camera. Press the reset button for
3 to 5 seconds using a pointed object such as a ballpoint pen in the
reset groove on the back of the camera. If you hear a beep,
the reset is complete.
▶
When replacement is complete, reassemble in the
reverse order of removal.
▶
Press the power button to turn off the power and
disconnect the power cord from the outlet.
▶
Turn both locking levers on the top side of the machine
by 90 degrees using the rear side of the wrench included
in the product. The maintenance part is unlocked.
Be sure to disconnect the power cord of the machine
from the power outlet.
Locked
Unlocked
North America Sales & Service www.RcomCo.com
Rcom small animals smart hospital ICU Camera Manual