Rcom UX-U900 User Manual Download Page 4

3-10)

 Camera connected.

Press and hold the camera window 

to display additional menu.

 Pressing the           button shows the

menu for right setting, logging out,

and exiting etc.

8:30

Hospital

Divices List

IP Camera

Add new device

4-1)

 If the connection is not smooth

due to a problem in the Internet network,

the above screen appears.

Please press QR code setting.

8:30

WI-FI Setting

Device ID (ex: 404087)

Try Again

QR Code Setting

WI-FI setting failed

Back

Network busy! Please try again.

First, please confirm whether the device make

beeping sound. If not beeping, you need back to

the first step of Add New Device?

If you heard continuous beeping sound, check

whether input incorrect Wifi password, and try

again.

If this setting failed several times, please try “QR

Code Setting” to cinfigure Wifi

4-2)

 Enter your Wi-Fi password

and press the Next button.

8:30

WI-FI Setting

Device ID (ex: 404087)

Back

Press “Reset” button with the Reset 

pin for 10 seconds untill hear a clash 

sound from the device, then input 

Wi-Fi password and tap “Next”

Input Wi-Fi password

Wi-Fi name

Next

When you scan the QR code to

the camera, make sure the

direction is slightly different so

that the scan is smooth.

4-3)

 The QR code appears on the screen.

Bring your smartphone to the camera

lens inside the Vetpel at a distance of

20 ~ 30cm and move it forward a little bit.

When you hear the Ding~ sound

from the camera press the Next button,

and your device is now connected to Wi-Fi.

8:30

QR Code Setting

Back

Move camera back and forth slowly scan

the QR code above at the distance about

20~30cm, after hear a beeping sound, tap

“Next”

Next

IP Camera

<When looking at the top of the inside>

<Please let the camera recognize the QR code screen.>

North America Sales & Service www.RcomCo.com

Rcom small animals smart hospital ICU Camera Manual

Reviews: