Humidity Down
Humidity UP
Humidity Setting
▶
When humidity display is blinking, adjust humidity
setting with or button.
(Default setting : 45%)
▶
After setting required humidity, press button
once then setting will be stored. Next, “HI” will be
indicated for about 0.5sec. and then maximum
temperature limit will blink.
Function Key
Function
Temp.
37.5
°
C
tEP
rH
HI
LO
45%
2
°
C
- 3
°
C
°
C
°
C /
°
F
Humidity
Centigrade /
Fahrenheit
Dispaly
Default Setting
Abnormal High
Temp. Alarm
Abnormal Low
Temp. Alarm
※
Just press button if you do not need to change
setting.
Abnormal High temperature:
This function gives notice when incubator
temperature is higher than setting temperature
because of abnormal ambient temperature increase.
When room temperature is higher than incubator
temperature, this function works with buzzer.
Here, "HI" and temp. gap are displayed alternatively.
Press OK button to remove buzzer.
How to Set Abnormal High Temperature Alarm
▶
Adjust abnormal high temperature value with
or button. (Default setting : 2
°
C)
▶
After setting required value, press button to save.
Then, it will go to the next stage, abnormal low temp.
setting with display "LO" for about 0.5 sec.
20
DIGITAL INCUBATOR
4. Function Settings
(2) Humidity Ssetting /
How to Set Abnormal High Temp. Alarm
(2) Humidity Ssetting /
How to Set Abnormal High Temp. Alarm
4. Function Settings
Increase
Decrease
USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
Incubator Hatcher Rcom King suro MX20 User Manual
