R-FORCE FOR INNER DOORS – INSTALLING AND OPERATING
INSTALLATION
7
6.
Insert the lever shaft spring (
8
) and the lever shaft extender (
9
) into the lever (
7
) that is
to be on the other side of the door.
7.
Mount the lever (
7
) in the lock.
8.
Mount R-FORCE (
11
) on the lever shaft extender and mount the other lever (
4
).
9.
Gently tighten the retainer bolts (
10
).
10.
Connect the red battery wire to one battery, the black wire to the other, and insert
the batteries.
Only use alkaline batteries of type 6LR61 (9V, 550 mAh).
11.
Mount the two brass bolt extenders (
12
) on the cylinder ring (
13
). Mount the cylinder
ring, cover plate (with the hole facing up if a modular lock is used) and lever. Align
R-FORCE with the door surface and tighten the bolts.
12.
Program R-FORCE as described below and check that it works correctly.
Brass
