RCm JUMBO 1002 RN, Instruction And Maintenance Handbook

Page: 45 / 81

45
TRAVEL SYSTEM (FIG.9)
The scrubber is driven by an electric system consisting of an electric drive wheel unit 1 at the front and an
electronic control unit 2 which controls operation of the drive wheel unit.
A joystick 16 (fi g. 3) sets the machine for forward or reverse travel.
The pedal 3 (fi g. 3) is then pressed to vary the travel speed.
There is also a three-position speed selector switch 12 (fi g. 3) on the dashboard, used to set the type of
speed (travel or working) required (see DESCRIPTION OF CONTROLS - POINT 12)
CAUTION!
THE SCRUBBER-DRIER HAVE THE THIRD SPEED USED ONLY FOR TRANSFER
BUT NOT TO WORK.
IN CASE OF FAILURE OF THE ELECTRIC SYSTEM DO NOT OPEN, DO NOT
DISCONNECT THE ELECTRONIC CONTROL UNIT AND/OR ITS COMPONENTS.
FOR ANY MAINTENANCE, REVISION OR REPAIR, CONTACT THE RCM AUTHORISED
SERVICE STAFF.