RCI RPTZ1080-18X+CTP18AH108, User Manual

Page: 28 / 55

HD IR AHD Intelligent High Speed Dome User Manual
27
4.2 Wall Mount Installation
4.2.1 Accessories
（
1
）
Wall Mount Bracket
To use with indoor and outdoor dome
Picture:
（
2
）
Accessories
Bolts, Spring Washers and Plain Washers, Water-proof Washers
（
Prepared by user
）
4.2.2 Installing Procedures
Wall Mount is applicable of indoor and outdoor hard walls. Installation requirements:
（
1
）
The wall is thick enough to support the Bolts, Washers.
（
2
）
The wall can endure at least 8 times of the weight of dome and all the accessories.
Procedure 1
：
Make a Hole and Fix the Anchor Bolts
Drill 4 holes on the wall according the dimension of wall mount bracket, and insert the M8 anchor
bolts(Prepared by the user) into the holes.
Procedure 2
：
Run the BNC cable through the wall mount bracket.
Procedure 3
：
Fix the Wall Mount Bracket on the Wall
Fix the 4 M8 screw caps with plain washers, and then screw them with the corresponding anchor bolts on
the wall (through the wall mount bracket and rubber washer).
Procedure 4
：
Dome Installation
Connect the top of dome housing with pendant bracket (connector) and fix by M5 screw. Then install the
dome according to Chapter 3.