Product Accessories Guide
Top Jamb bracket and angle bracket kit is required for use when
mounting the lock on a door that swings inwards. Magnet mounts to
the underside of an angle bracket mounted on the frame. Armature
plate mounts to “Z” bracket assembly mounted to door face.
Used in a narrow head jamb situation or for center-hung doors.
Any place where there is insufficient frame depth to mount the lock.
Available in several different sizes and finishes.
Allows an armature plate to be mounted to a glass or Herculite door
that does not have a frame. The Glass Door Bracket is a “U”-shaped
piece of 1/16” thick material that slips over the top of the glass
panel and tightens to the glass with setscrews. The Armature plate
mounts directly to the surface of the bracket by means of a threaded
hole in the bracket assembly plate.
Available for both 1/2” and 3/4” thick glass doors.
Used to provide extra mounting space in a hollow metal or wood
frame where the door stop of the frame is not thick enough to allow
a lock to be installed.
Available in several different heights and widths.
For use when an obstruction in the door prevents the installation of
the armature plate at a proper height. If the armature plate needs
to be lowered then a spacer bar can be used to lower the lock from
the frame.
Available in several different heights.
For use with doors that do not permit the armature plate to be
mounted low enough to meet the magnet surface. Eg: Some
aluminum framed commercial glass doors. The armature holder can
be mounted to whatever frame is available and the armature plate in
turn mounted to the holder.
Available in pocket style.
Top Jamb Bracket
Angle Bracket
Glass Door Bracket
Filler Bars
Spacer Bars
Armature Holder
Part
Usage
Example
8371/ 8372 Electromagnetic Lock Installation Instructions
(Continued)
4
Accessories may impact holding force.
(Separate installation instructions provided with accessories.)