6
APPLICATION GUIDE
3.3 Mounting Brackets
Each speaker is supplied with U brackets for installation in Horizontal or Vertical positions.
Horizontal U bracket installation: fix the loudspeaker to the U bracket by tightening the two bolts (M8 on P 2110,
M10 on P 3115 and P 6215) into the two loudspeaker central holes.
Vertical U bracket installation: put the two shims on the loudspeaker and fix them by tightening two pairs of bolts
(M8 on P 2110, M10 on P 3115 and P 6215).
Then fix the loudspeaker to the U bracket by tightening the other two bolts into the two loudspeaker central holes.
3.4 Aiming of P-Series Loudspeakers
The aiming of the P Series speakers is possible whilst fixing the U brackets. Before tightening the two centre bolts,
adjust the loudspeaker tilt and then (when you are sure of the correct angle) fix the position using the thread-
forming screws into the U bracket (small holes next to the central hole).
3.5 Conversion to sealed box for outdoor installation
By default, P series loudspeakers are vented boxes (bass-reflex). Yet, all P Series loudspeakers can be converted to
a sealed box for outdoor application (in order to get IP 55 protection) by proceeding as follows:
· take off the loudspeaker front grille by removing the eight screws;
· cover the four reflex ports (the holes) by using the dedicated plugs (to be fixed each with three
thread-forming screws);
· re-fit the loudspeaker grille.
