9
ENGLISH
WARNING:
Make sure all speakers are installed in a stable and secure way in order to
avoid any conditions that may be dangerous for persons or structures.
Ensure the support surface (walls, ceilings, etc.) has the necessary mechanical
characteristics to support the speaker weight.
Before installing every speaker, carefully check all components to be used and make sure
there is no damage, deformation, corrosion and/or missing or damaged parts that could
reduce the safety of the installation.
This speaker can be installed both indoors and outdoors (IP 66).
1
Fix the mounting bracket (only) to the wall with screws and wall plugs through its
three 10 mm holes.
2
Remove the rear cover by loosening its four screws.
3
Connect the speaker as previously described in the ‘Connection’ manual section.
4
Refit the rear cover.
5
Install the horn speaker on its mounting bracket with its two lateral bolts (without
tightening them).
6
Aim the horn speaker to the listening area and fix its position by tightening the two
lateral bolts of its mounting bracket.
INSTALLATION
5
2
6
4
6
3
1
