1
ENGLISH
RCF S.p.A. thanks you for purchasing this product, which has been designed
to guarantee reliability and high performances.
DESCRIPTION
It is a slim cardioid electret microphone having a flexible gooseneck.
It offers impressive acoustic features and a mechanical design that is ideal
for public address sound systems.
This microphones has two switches (PUSH, LOCK), a red ring lamp that lights
up when the microphone is activated, a high-pass filter with a switch to cut
frequencies below 100 Hz.
It can be mounted on tables (with or without a hole), podiums, pulpits, etc..
It can be mounted on microphone floor stands too.
It has a built-in ‘Phantom’ power circuit; therefore, it needs to be connected to
a mixer microphone input with 12 V ÷ 52 V ‘Phantom’ power supply.
INSTALLATION
I. TABLE TOP MOUNTING (DRILLING THE TABLE)
a.
Drill a 23 mm diameter hole on the desired location (table or podium).
The thickness of the mounting surface shall not exceed 32 mm.
b.
Insert the longest threaded part of the base into the rubber pad.
c.
Insert the base through the drilled hole.
d.
Under the table, put the rubber pad into the threaded base.
e.
After fixing the rubber pad in place, put the washer into the base.
f.
Screw the nut.
g.
Tighten the nut partially.
h.
Insert the cable through the hole of the base and attach it to the 5 pin
JST connector of the microphone (located at the bottom).
i.
Screw the microphone to the base.
j.
Check the position of the microphone (its switches must face the user).
If necessary, adjust again and then tighten the nut.
Summary of Contents for MC4040
Page 2: ......
Page 19: ...19 ENGLISH GROMMET FLANGE...
