10
Gently remove the plastic cover
with the help of a screwdriver.
5 pin connector
3 pin connector
Be sure to connect
each connector in its proper position.
ENGLISH
INSTALLATION AND USE
With the help of a small flat screwdriver press horizontally the plastic cover on its right side and remove it carefully.
To install a RCF Mixing Consoles Bluetooth card or a RCF Mixing Consoles player card, plug the 5 pin cable into the 5 pin connector on the PCB board
as shown.
To install a RCF Mixing Consoles player/recorder card, plug the 5 pin cable into the 5 pin connector and the 3 pin cable into the 3 pin connector on the
PCB board as shown.
Now place the optional card in its site and enjoy the new functions.
RCF MIXING CONSOLES BLUETOOTH CARD
Turn the Bluetooth interface on your mobile device on and press the PAIR button on the card. Your mobile device will recognize the “BT2.1” Bluetooth
device. Pair your device with the BT2.1 device. You can now play your favourite music.
Turn clockwise the knob named 2TK/MP3 up to 12 o’clock position and check if the TO MAIN MIX/TO CTRL ROOM switch is in upper position; now raise
carefully the MAIN MIX fader up to the desired listening level. You can adjust the volume on the card panel also pressing the buttons VOL+ and VOL‑.
RCF MIXING CONSOLES PLAYER CARD
From your computer, copy in a USB drive as many mp3 files as you want, even contained in folders (max 32 GB total), insert the USB pen in the USB
dedicated connector on the card, press and hold the PUSH&HOLD button for two seconds, the card will start to play the first file of the first folder, the
display will show alternatively the number of the file and the number of the folder which is playing. Press the “ ” or “ ” button to skip to the previous
or to the following track. Hold the same buttons pressed to change the selected folder. Use the PLAY/PAUSE button to pause or restart playback. Press
STOP to stop playback. Press the loop button ( ) repeatedly to select random play, loop the current track or loop the entire programme, respectively.
Turn clockwise the knob named 2TK/MP3 up to 12 o’clock position and check if the TO MAIN MIX/TO CTRL ROOM switch is in upper position; now raise
carefully the MAIN MIX fader up to the desired listening level.
RCF MIXING CONSOLES PLAYER/RECORDER CARD
From your computer, copy in a USB drive as many mp3 files as you want, even contained in folders (max 32 GB total). Insert the USB flash drive in the
dedicated USB port on the card, press and hold the PUSH & HOLD button pressed for two seconds. The card will start playing the first file in the first
folder. The file number and folder number which is playing will be shown on the display. Press the “ ” or “ ” buttons to skip to the previous or to
the following music file. Hold the same buttons pressed to change the selected folder. The card allows you to record the program present on MAIN MIX:
press the REC button once, now the board is in “rec ready status” and the display shows a flashing REC advise; press REC again to start recording;
press PUSH&HOLD button once for stop recording; the card will create a new folder on the USB pen called FrE01 where the created files will find place.
Use the PLAY/PAUSE button to pause or restart playback. Press the loop button ( ) repeatedly to select random play, loop the current track or loop the
entire programme, respectively.
Turn clockwise the knob named 2TK/MP3 up to 12 o’clock position and check if the TO MAIN MIX/TO CTRL ROOM switch is in upper position; now raise
carefully the MAIN MIX fader up to the desired listening level.
OPTIONAL CARDS
