Lift up the rear bracket of the highest cabinet.
Insert the quick lock pin in the “suspension” hole “A” of the
flybar.
Turn down the flybar until it rests on the first speaker.
Begin to lift the flybar, and when it goes on traction on the first
module, insert the locking pin in the hole “B”.
Always follow the sequence “suspension” and “locking” and
never use only the locking pin because it is not designed to
load the weight of the system. It only prevent the system from
going into compression shifting the tilt of the cluster.
Continue to lift the cluster and the angles of the speakers will
automatically switch to the correct position.
A
B
C
Summary of Contents for HDL 50-A
Page 1: ...OWNER MANUAL ACTIVE THREE WAY LINE ARRAY MODULE HDL 50 A...
Page 10: ......